36V to 48V NiMh/NiCD Smart Charger (2.0A) with 3 pins Plug

36V to 48V NiMh/NiCD Smart Charger (2.0A) with 3 pins Plug-1
36V to 48V NiMh/NiCD Smart Charger (2.0A) with 3 pins Plug-2
36V to 48V NiMh/NiCD Smart Charger (2.0A) with 3 pins Plug-3

SKU: CH-UN4820B Product ID: 8399

$90.85

Shipping calculated at checkout

Notes to Customers: 

In stock!
Description Return and Exchanges

Features:

Manufacture part# SPS-N40S02-162
Product Multi-current Universal Fast and Smart Charger for any NiMh / NiCd battery packs from 36V-48V (30-40 cell pack)
Input AC 100-240V  50-60Hz worldwide power support
Output DC 64V
Charging Current 2000mA
Connector
Efficiency > 80%
Operate Temperature -10 oC to + 40 oC
Dimension(LxWxH) 180mm(7.1") x 90mm(3.5") x 50mm(1.9")
Weight 27oz (764grams)
Specification Please download specification

Functions

  • Stabilized output, low ripple
  • Built in cooling fan to ensure charger long service life
  • 8-hour safety timer, charger will stop charging after operates 8 hours
  • Automatically cut-off by negative delta V detecting or when battery's temperature is over 60 oC
  • Protection: Output Short circuit protection, Output Polarity reverse protection.
  • LED indicator
    • Red LED: Charging
    • Green LED: fully charged
    • Red Flashing: recognizes battery as damaged or voltage is below 20V
    • LED will be off if short circuit or polarity is reversed.
    • Note: when first connect AC power (turn on power) wink red/green twice then off - charger passed self test!

Accessories Included

Operation Instruction

  • Connect AC power to charger. Turn power switch to "on" position (LED will wink red/green twice)
  • Connect battery pack's charging terminal to charger
  • Make sure battery polarity is connected correctly (Red wire is positive)
  • Attach temperature sensor to battery pack firmly or the BEC connector from the battery pack if available
  • When charger connectos to the AC source, red LED will flash for 2 times and green LED
  • After battery is fully charged, green LED will be on and it shows the battery fully charged.

Warnings

  • Use with NiMH pack 36 to-48V pack only
  • Indoor user only,
  • Don't open the cover due to dangerous hi-voltage inside
  • Don't place the charger near radiator, heat source device
  • Please don't use the charger for low capacity battery pack (<4000mah).. strongly suggest use Powerizer brand high drain rate battery pack. We are not responsible for any damage caused by charging other brand battery using this charger.
  • Please plug in AC power first, then connect the battery to the charger, otherwise, there is no output from the charger.
  • For the 36V/48V NiMH made by 3 or 4 series 12V NiMH module, Must disconnect discharge terminal separately before charge.
  • For the parallel pack of 36V/48V NiMH pack, Must disconnect discharge terminal separately before charge & Must charge each module separately (Don't combine charge at a time)
  • California residents: Warning: Cancer and Reproductive Harm - See Prop 65 Warnings

Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can't offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.