| Protection Circuit Board Specifications For 10S Li-ion/Li-po Battery Pack |
| Model: PCM-LI10S10A |
| No. |
Test item |
Criterion |
| 1 |
Voltage |
Charging voltage |
DC: 4.2V CC/CV |
| Balance voltage for single cell |
4.20±0.05V |
| 2 |
Current |
Balance current for single cell |
68±10mA |
| Current consumption for single cell |
≤150μA |
| Maximal continuous Charging current |
10A |
| Maximal continuous discharging current |
10A |
| 3 |
Over charge Protection
(single cell) |
Over charge detection voltage |
4.25±0.05V |
| Over charge detection delay time |
0.5S-2S |
| Over charge release voltage |
4.15±0.05V |
| 4 |
Over discharge protection
(single cell) |
Over discharge detection voltage |
2.75±0.1V |
| Over discharge detection delay time |
150-300mS |
| Over discharge release voltage |
3.00±0.1V |
| 5 |
Over current protection |
Over current detection voltage |
N/A |
| Over current detection current |
30±10A |
| Detection delay time |
50ms-500ms |
| Release condition |
Cut load, auto recover |
| 6 |
Short protection |
Detection condition |
Exterior short circuit |
| Detection delay time |
200-800us |
| Release condition |
Cut load, auto recover |
| 7 |
Resistance |
Protection circuitry (B- TO P-) |
≤20mΩ |
| 8 |
Temperature |
Operating Temperature Range |
-40 to +70 |
| Storage Temperature Range |
-40 to +125 |
| 9 |
Weight |
|
|
| 10 |
Dimenstion |
LxWxH |
65 x 31 x 9 mm |
| 11 |
Specification in pdf file |
 Download the specification |
|
For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category
Warning
- If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch.
- You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.
Our policy lasts 30 days. If 30 days have gone by since your purchase, unfortunately we can't offer you a refund or exchange. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
