BMS with SMBus for 5S-16S Li-ion/LiFePO4 Battery Pack at 100A rate (#12134)
| Protection Circuit Module Specifications For 5S-16S Li-ion/LiFePO4 Battery Pack | ||||
| Features |
|
|||
| No. | Test item | Criterion | ||
| 1 | Communication Interface | SMBus | ||
| 2 | Capacity | Designed battery capacity |
10-100Ah | |
| 3 | Charge Voltage | B+, P- | Li: 4.2V/cell x Number in series |
|
| 4 | Continue charge current | B+, P- | <101Amp | |
| 5 | Continue discharge current | B+, P- | <101Amp | |
| 6 | Internal resistance | B-, P- | <5mΩ | |
| 7 | Cell Balance current | 116±10mA | ||
| 8 | System Power consumption | Working | ≤600uA (+25°C) | |
| SMBus Communication | ≤2000uA (+25°C) | |||
| Sleeping (average) | ≤350uA (+25°C) | |||
| 9 | Work temperature | -20 to 85°C | ||
| 10 | Storage temperature | -40 to 125°C | ||
| 11 | Working Humidity | <75%RH | ||
| 12 | Storage Humidity | <85%RH | ||
| 13 | Dimension | LxWxT | 240x120x15mm | |
| 14 | Notes | The connection between cells and PCB should followe this order: B- ->B1->B2->B3->...->B16->B+, otherwise it will cause potential damage to the BMS. |
||
| 15 |
Customer can not program the board, we will preset the board according to your battery's specification. 1. Cell's manufacturer and module number |
|||
For other PCM/PCB, please check our PCM/PCB/BMS/CMB/UPS category
Warning
- If you want to use this protection circuit board for a battery that is less than the rated drain, you must add additional protection device to protect the battery itself. Such as: proper rated polyswitch.
- You must be professional in Lithium battery pack to buy the protection circuit board. Misusing may cause battery damage or explode. We are not responsible for any damage caused by user.